Yuantai Hot Rolled/Finished EN10210 Steel Hollow Section
Yuantai Hot Rolled/Finished EN10210 Steel Hollow Section
Yuantai Hot Rolled/Finished EN10210 Steel Hollow Section
Yuantai Hot Rolled/Finished EN10210 Steel Hollow Section
Yuantai Hot Rolled/Finished EN10210 Steel Hollow Section
Yuantai Hot Rolled/Finished EN10210 Steel Hollow Section
Model
steel hollow section

Item specifics

Thickness
0.5- 60 mm
OD(Outer diameter)
10*10-1200*1200mm 10*15-800*1200mm
Surface Treatment
Black painted or REQUEST
Tolerance
as required
Length
0.5-26.5M according to client requirement
Materials
Gr.A/B/C,S235/S275/S355/S420/S460/A36
Delivery Time
7-30 Days

Review

Description

Yuantai Hot Rolled/Finished EN10210 Black Square Hollow Section

1. EN10210 Hot Rolled/Finished Hollow Section

EN10210 is a European standard for hot rolled/finished structural hollow sections. EN10210 hot rolled/finished hollow section refers to the steel hollow section variant of the produced steel pipe that meets the European standard EN10210. EN10210 specifies the size, material, and performance of hollow sections used in construction and engineering applications. These en 10210 hot rolled/finished hollow sections have a wide range of applications, including the construction of buildings, bridges, and other structures. EN10210 hot rolled/finished hollow section is also used in mechanical and equipment manufacturing, vehicle chassis and body frames, and many other applications that require sturdy and lightweight components.
EN10210 square hollow section

2.The Forming Process Of EN10210 Hot Rolled/Finished Hollow Section

(1) The raw materials include steel coils, welding wires, and welding flux. Strict physical and chemical testing must be conducted before investment.
(2) Single wire or double wire submerged arc welding is adopted for butt joint of strip steel head and tail, and automatic Submerged arc welding welding is adopted for repair welding after being rolled into square pipe.
(3) Before forming, the strip steel undergoes leveling, edge cutting, edge planning, surface cleaning, transportation, and pre bending treatment.
(4) The use of an electric contact pressure gauge to control the pressure of the hydraulic cylinders on both sides of the conveyor ensures the smooth transportation of the strip steel.
(5) Adopting external or internal control roller forming.
(6) The use of a weld gap control device ensures that the weld gap meets welding requirements, and the pipe diameter, misalignment, and weld gap are strictly controlled.
(7) Both internal welding and external welding are performed by Lincoln electric welding machine with single wire or double wire submerged arc welding, so as to obtain stable welding specifications.
(8) The completed welds have undergone online continuous ultrasonic automatic damage detection, ensuring 100% non-destructive testing coverage of the welds. If there are defects, automatic alarm and spray marking will be given, and production workers can adjust process parameters at any time to eliminate defects in a timely manner.
(9) Cut the square tube into individual pieces using an air plasma cutting machine.
(10) After being cut into a single square tube, the first three square tubes of each batch shall be subject to a strict first inspection system to check the mechanical properties, Chemical composition, fusion condition, surface quality of the square tube, as well as the non-destructive inspection to ensure that the tube manufacturing process is qualified before being officially put into production.
(11) The parts with continuous sound wave inspection marks on the weld seam undergo manual ultrasonic and X-ray re examination. If there are indeed defects, they are repaired and undergo non-destructive testing again until it is confirmed that the defects have been eliminated.
(12) The pipes where the strip steel butt weld and the J-joint intersect with the spiral weld are all inspected by X-ray television or photography.
(13) Each square tube undergoes a hydrostatic test, and the pressure is sealed radially. The test pressure and time are strictly controlled by the square tube water pressure microcomputer detection device. Test parameters are automatically printed and recorded.
(14) Mechanical processing of the pipe end ensures accurate control of the perpendicularity, groove angle, and blunt edges of the end face.
Pipe material warehouse quenching, normalizing heating water quenching tempering heating high-pressure water descaling sizing cooling straightening cooling removing oxide scale inspection of the inner surface of the left pipe end inspection of the inner surface of the right pipe end inspection of the inner surface of the right pipe end inspection of the pipe body manual outer surface inspection water pressure test(optional)  collection and storage

3.EN10210 Hot Rolled/Finished Steel Hollow Sections Sizes

Only partial models of EN10210 hot-rolled or heat-treated steel hollow sections are displayed here. If you need to know more product models, please contact your account manager.

O.D. mm

W.T.mm

O.D mm

W.T. mm

O.D mm

W.T. mm

O.D mm

W.T. mm

20*20

1.3

60*120 80*100 90*90

1.50

180*180

3

300*800 400*700 550*550 500*600

 

1.4

1.70

3.5-3.75

9.5-9.75

1.5

1.80

4.5-4.75

11.5-11.75

1.7

2.00

5.5-7.75

12-13.75

1.8

2.20

9.5-9.75

15-50

2.0

2.5-4.0

11.5-11.75

 

20*30 25*25

1.3

4.25-4.75

12.0-25.0

 

1.4

5.0-6.3

100*300 150*250 200*200

2.75

300*900 400*800 600*600 500*700

 

1.5

7.5-8

3.0-4.0

9.5-9.75

1.7

50*150 60*140 80*120 100*100

1.50

4.5-9.75

11.5-11.75

1.8

1.70

11.5-11.75

12-13.75

2.0

2.00

12.5-12.75

15-50

2.2

2.20

13.5-13.75

 

2.5-3.0

2.5-2.75

15.5-30

 

20*40 25*40 30*30 30*40

1.3

3.0-4.75

150*300 200*250

3.75

300*1000 400*900 500*800 600*700 650*650

 

1.4

5.5-6.3

4.5-4.75

 

1.5

7.5-7.75

5.5-6.3

9.5-9.75

1.7

9.5-9.75

7.5-7.75

11.5-11.75

1.8

11.5-16

9.5-9.75

12-13.75

2.0

60*160 80*140 100*120

2.50

11.5-11.75

15-50

2.2

2.75

13.5-30

 

2.5-3.0

3.0-4.75

200*300 250*250

3.75

400*1000 500*900 600*800 700*700

 

3.25-4.0

5.5-6.3

4.5-4.75

 

25*50 30*50 30*60 40*40 40*50 40*60 50*50

1.3

7.5-7.75

5.5-6.3

9.5-9.75

1.4

9.5-16

7.5-7.75

11.5-11.75

1.5

75*150

2.50

9.5-9.75

12-13.75

1.7

2.75

11.5-11.75

15-50

1.8

3.0-3.75

12-13.75

 

2.0

4.5-4.75

15.5-30

 

2.2

5.5-6.3

200*400 250*350 300*300

4.5-6.3

500*1000 600*900 700*800 750*750

 

2.5-3.0

7.5-7.75

7.5-7.75

9.5-9.75

3.25-4.0

9.5-16

9.5-9.75

11.5-11.75

4.25-4.75

80*160 120*120

2.50

11.5-11.75

12-13.75

5.0-5.75

2.75

12-13.75

15-50

5.75-6.3

3.0-4.75

15.5-30

 

40*80 50*70 50*80 60*60

1.3

5.5-6.3

200*500 250*450 300*400 350*350

5.5-6.3

500*1100 600*900 700*800 800*800

 

1.5

7.5-7.75

7.5-7.75

9.5-9.75

1.7

9.5-9.75

9.5-9.75

11.5-11.75

1.8

11.5-20

11.5-11.75

12-13.75

2.0

100*150

2.50

12-13.75

15-50

2.2

2.75

15.5-30

 

2.5-3.0

3.0-4.75

280*280

5.5-6.3

600*1100 700*1000 800*900 850*850

 

3.25-4.0

5.5-6.3

7.5-7.75

9.5-9.75

4.25-4.75

7.5-7.75

9.5-9.75

11.5-11.75

5.0-6.0

9.5-9.75

11.5-11.75

12-13.75

40*100 60*80 70*70

1.3

11.5-20

12-13.75

15-50

1.5

100*200 120*180 150*150

2.50

15.5-30

 

1.7

2.75

350*400 300*450

7.5-7.75

700*1100 800*1000 900*900

 

1.8

3.0-7.75

9.5-9.75

11.5-11.75

2.0

9.5-9.75

11.5-11.75

12-13.75

2.2

11.5-20

12-13.75

15-50

2.5-3.0

100*250 150*200

3.00

15.5-30

 

3.25-4.0

3.25-3.75

200*600 300*500 400*400

7.5-7.75

800*1100 900*1000 950*950

 

4.25-4.75

4.25-4.75

9.5-9.75

11.5-11.75

5.0-6.3

9.5-9.75

11.5-11.75

12-13.75

50*100 60*90 60*100 75*75 80*80

1.3

11.5-11.75

12-13.75

15-50

1.5

12.25

15.5-40

 

1.7

140*140

3.0-3.75

300*600 400*500 450*450

7.5-7.75

900*1100 1000*1000 800*1200

 

1.8

4.5-6.3

9.5-9.75

 

2.0

7.5-7.75

11.5-11.75

20-60

2.2

9.5-9.75

12-13.75

 

2.5-3.0

11.5-25

15.5-40

 

3.25-4.0

160*160

3.00

400*600 500*500

9.5-9.75

1100*1000 1200*1200

 

4.25-4.75

 

3.5-3.75

11.5-11.75

20-60

5.0-5.75

 

4.25-7.75

12-13.75

 

7.5-8

 

9.5-25

15.5-40

 

4.Hot Rolled/Finished EN10210 Steel Hollow Section Material

Yuantai Derun hot rolled/finished EN10210 steel hollow section has a wide range of steel grades, among which the common steel grades of heat treatment hollow sections are: S235/S275/S355/420/460,Gr.A/Gr.B/Gr.C,SS400,Q195/235/355,C250/350/450, etc. Of course, if you have a special grade, we can also custom produce the hot rolled steel hollow sections you need.   Contact Us Now!

5.Mechanical Properties Of Hot Rolled/Finished Steel Hollow Sections:

Steel Grade
Yield Strenth(MPa)
Tensile strength(MPa)
Elongation(%)
T ≤ 16mm
T > 16mm
3mm < T ≤ 100mm
T
S355NH
355
345
470-630
22
S420NH
420
520-680
19
S460NH
460
540-720
17

6. Chemical Composition

Steel Grade
C max(%)
Si max
(%)
Mn
(%)
P max
(%)
S max
(%)
Nb max
(%)
V max
(%)
Al total min(%)
Ti max
(%)
Cr max
(%)
Ni max
(%)
Mo max
(%)
Cu max
(%)
N max
(%)
S460NH
0.22
0.60
1.70
0.035
0.030
0.050
0.20
 0.020
0.03
0.30
0.80
0.10
0.70
0.025
S420NH
0.20
0.60
1.00-
1.70
0.035
0.030
0.050
0.20
0.020
0.03
0.30
0.80
0.10
0.70
0.025
S355NH
0.20
0.50
0.90-
1.65
0.035
0.030
0.050
0.12
0.020
0.03
0.30
0.50
0.10
 0.35
0.020

7.Specification And Physical Parameters Of EN10210 European Standard Steel Hollow Section

The above is the main content of the European standard square tube information size table (EN10210), which can help everyone better understand the specification parameters and performance characteristics of European standard square tubes, so as to better apply them in actual production and engineering design.More information please contact us
Size(mm)
THK(mm)
Weight(kg/m)
Sectional area(CM2)
Moment of inertia Ix(CM4)
Moment of inertia Iy(CM4)
Torsional moment of inertia J(CM4
Section modulus Wx(CM3)
Section modulus Wy(CM3)
40×40
1.85
2.30
3.07
0.46
0.46
0.021
0.60
0.60
50×50
2.35
2.93
4.04
1.02
1.02
0.051
1.33
1.33
60×60
2.35
3.54
4.89
1.53
1.53
0.092
2.22
2.22
70×70
2.5
4.25
5.85
2.34
2.34
0.159
3.43
3.43
80×80
2.5
4.92
6.77
3.05
3.05
0.251
4.83
4.83
90×90
3
6.36
8.75
4.43
4.43
0.468
7.22
7.22
100×100
3
7.11
9.74
5.43
5.43
0.691
9.03
9.03

8.Overview of Yuantai Derun

Yuantai Derun No.4 factory

Universal Structural Hot Rolled Square Tube Service Provider

12 factories, 103 production lines, 80 patented technologies, China's top 500 private enterprises and China's top 500 manufacturing industries, with an annual output of 10 million tons and a perennial spot supply of 200000 tons. China's largest square tube manufacturer.

YuantaiDerun's main products include square steel pipe, rectangular steel pipe, hot-dip galvanized steel pipe, ERW steel pipe, large-diameter thick wall square rectangular pipe, LSAW steel pipe, spiral steel pipe, seamless steel pipe, stainless steel pipe, galvanized coil, ppgi and stainless steel coil.

9.Advantage Of EN10210 Hot Rolled/Finished Steel Hollow Section

black  square hollow section manufacturer yuantai derun

Pipe orifice leveling

black  square hollow section supplier yuantai derun

The surface shall be painted to prevent oxidation

black  square hollow section factory yuantai derun

Uniform thickness

black  square hollow section manufacturer

High yield

black  square hollow section factory

The inner wall of the pipe shall be flat and smooth without burrs

black  square hollow section

Safe transportation in its own fleet

10. Free Samples For You

Usually, we can provide customers with free samples in advance, within 20 centimeters. However, due to the heavy weight of steel, customers need to bear the shipping costs themselves. Get free samples now.

11. Application Of EN10210 Hot Rolled / Finished Steel Hollow Section

As of today, Yuantai Derun Steel Pipe Group has provided cooperative production solutions for over 6000 various projects. For the project, Yuantai has accumulated a lot of practical experience. If you have any questions, please contact our project manager immediately.
Beijing Daxing International Airport
AIRPORT VENUES
Black high-frequency welded pipes are indispensable in airport venue buildings,Black high-frequency welded pipes are indispensable in the airport venue buildings. This is our cooperation project Beijing Daxing International Airport
2020 Dubai World Expo venue
EXPO VENUES
2020 Dubai World Expo venue,The 2020 Dubai World Expo venue is one of the projects we participate in
Hong Kong-Zhuhai-Macao Bridge
BRIDGE CONSTRUCTION
Hong Kong-Zhuhai-Macao Bridge,Our products are involved in the construction of bridges. It is a bridge and tunnel project connecting Hong Kong, Zhuhai, Guangdong and Macao in China. 
SINGAPORE GOOGLE BUILDING
BUILDING CONSTRUCTION
SINGAPORE GOOGLE BUILDING,From 2018 to 2019, we provided steel pipes with hollow section profiles for the construction of Google building in Singapore
 million feidan land improvement project in Egypt
GREENHOUSE CONSTRUCTION
From 2017 to 2018, we provided 75000 tons of steel pipe products for the green house of the million feidan land improvement project in Egypt.
CBD business district buildings in Cairo, Egypt
CBD business district building
From 2019 to 2020, we provided our steel pipe products for the building development of CBD business district buildings in Cairo, Egypt
National Grand Theatre
THEATER CONSTRUCTION
Located in the west of Tiananmen Square in central Beijing, the National Grand Theatre is the largest theater complex in Asia.
Dubai Hill
High grade villa building
In 2018, we provided steel pipe products for Dubai Hill high-end villa construction project

Packaging And Shipping

Packaging And Shipping
Delivery time worldwide
To South Africa: 45 days
To the Middle East: 30 days
To South America: 60 days
To North America: 30 days
To Russia: 7 days
To Europe: 45 days
To Korea: 5 days
To Japan: 5 days
To Vietnam: 15 days
To Thailand: 15 days
To India: 30 days
To Indonesia: 15 days
To Singapore: 15 days

Why Choose Yuantai Derun?

  • 1. 100% after-sales quality and quantity assurance.
  • 2. Professional sales manager quickly reply within 24 hours.
  • 3. Large Stock for regular sizes.
  • 4. Free sample 20cm high quality.
  • 5. Strong produce capability and capital flow.
  • 6. Small order accepted.
  • 7. Brand name raw material
  • 8. Support OEM or ODM
  • 9. 21 years Manufacturing experience
  • 10. It can manufacture steel pipes of different projects and standards in the world
  • 11. Yuantai has a standing stock of more than 200000 tons, and the annual shipment specification is:
  • 10*10*1.0—1200*1200*60mm,
  • 10*15*0.5—800*1200*60mm,
  • Φ 219— Φ 3620mm,
  • The black steel pipe, hot-dip galvanized rectangular pipe and spiral welded pipe have an existing capacity of nearly 5 million tons,
  • After the completion of the new base in Tangshan, the total production capacity will reach 10 million tons.