SHS Steel 200 X 200 X 5 mm For Bridge Structure | Large Diameter | Medium Thickness
- Model
- shs steel
Item specifics
- Thickness
- 5 mm
- OD(Outer diameter)
- 200x200mm
- Certification
- CE,LEED,BV,PHD&EPD,BC1,DNV,EN10210/10219,ISO9000
- Surface Treatment
- Black painted or REQUEST
- Tolerance
- as required
- Length
- 0.5-26.5M according to client requirement
- Standards
- ASTM A500/A501,EN10219/10210,JIS G3466
- Materials
- Gr.A/B/C, S235/275/355/420/460, A36,A53,A106
- Delivery Time
- 7-30 Days
Review
Description
SHS Steel 200 X 200 X 5 mm For Bridge Structure | Large Diameter | Medium Thickness
Square Hollow Section (SHS) is also referred to as Square Mild Steel Hollow Section or Hollow Square. SHS Steel 200 X 200 X 5 mm For Bridge Structure | Large Diameter | Medium Thickness produced by Yuantai Derun have those advantages such as good quality,tight weld,Smooth inner and outer walls。 Yuantai Derun offer a variety of finishing options upon request, including oiling, priming and hot-dip galvanising.
SHS Steel Sizes For Your Bridge Project
Yuantai Derun can mass produce and customize 200x200 SHS (square hollow section) for bridge structures, with dimensions as shown in the table, excluding customized diameter SHS steel To learn more about SHS Steel for bridges, please contact us immediately.
Advantage Of SHS Steel Sections Produced By Yuantai Derun
Advantage Of SHS Steel Sections Produced By Yuantai Derun,Such as:
1. Tight weld seam
When producing SHS Steel Section, Yuantai Derun adopts the world's advanced direct molding technology, and uses traceable raw materials purchased by large factories. The welding flux uses materials with high fusion with the base material, and the entire production process adopts electronic control operation, which maximizes the tightness, strength, and resistance to cracking of each weld on the square tube body, making your bridge structure project safer and more worry free.
2. Performance guarantee
Every SHS Steel Section purchaser must meet your requirements in terms of standards, steel grades, and performance when measuring Chinese SHS Steel Pipe suppliers. To this end, Yuan Taide Run has established a CNAS certified laboratory, which ensures that the chemical composition, yield strength, tensile strength, and impact testing of the SHS Steel Section meet the corresponding standard requirements for bridge structures. Send Your Inquiry Now!
Free SHS(Square Hollow Section) Steel Samples For You
In order to facilitate more reassuring cooperation for buyers, we have launched a free sample policy. Normally, the length should be within 20 centimeters, and you only need to pay one shipping fee. Eliminating customers' concerns about quality and performance. Get free samples now!
Coating For Your Square Tube 200x200 mm
At Yuantai Derun, we can provide various surface treatments for your 200x200mm square tube. To protect your square hollow section from rust and corrosion.
1. Apply oil
2. Spray painting
3. Hot dip galvanizing
Added Service
At Yuantai Derun, we also provide the following value-added services for every purchaser.
1. Heat treatment
After the square hollow section is welded into shape, there will inevitably be some residual internal stress around the weld seam, which can be eliminated by heat treatment.
2. R-angle customization
The R-angle of a square hollow section usually has a curvature. If the customer's special structure requires the curvature of the square tube to be turned into the right angle they want, or the right angle of the inner and outer walls, we can provide customers with four corner heating and flexibly customize the required R-angle.
3. Processing
Yuantai Derun can provide customers with some simple processing services for SHS Steel 200 X 200 X 5 mm, such as customized length cutting, punching, welding, bending, etc., to maximize customer satisfaction.
One Of The Largest SHS Steel Pipe Factories In The World
Project
BRIDGE CONSTRUCTION
Hong Kong-Zhuhai-Macao Bridge，Our products are involved in the construction of bridges. It is a bridge and tunnel project connecting Hong Kong, Zhuhai, Guangdong and Macao in China.
BUILDING CONSTRUCTION
SINGAPORE GOOGLE BUILDING，From 2018 to 2019, we provided steel pipes with hollow section profiles for the construction of Google building in Singapore
FAQS
:What are the other names for SHS steel?
SHS steel is also known as square hollow sections or square tubes.
Are SHS Steel sections available in different shapes?
SHS Steel sections are primarily available in square shapes, but other shapes, such as rectangular hollow sections (RHS), are also available.
Can large diameter SHS be used for structural purposes other than bridges?
Yes, large diameter SHS can be used in various applications, including infrastructure projects, industrial buildings, and architectural designs.
Are there any alternative materials to SHS Steel for bridge structures?
While there are alternative materials available, such as rectangular hollow sections (RHS) or circular hollow sections (CHS), SHS steel remains a popular choice due to its specific structural properties.
How does thick wall SHS affect the overall stability of a construction project?
Thick wall SHS provides additional structural stability, enabling heavy-duty applications and enhancing the load-bearing capacity of the overall construction project.
